top of page


“Current-Start, Voltage-Hold”: Making DC Anti-Pumping Circuits Actually Reliable
How ODES UEG/I DC current relays distinguish real coil operation from virtual voltage and transient spikes Why Voltage-Only Logic Is Not Enough in DC Control Circuits In DC trip and close circuits, engineers face three recurring headaches at the same time: High inrush current when a trip or close coil is energized Short-duration DC bus dips and ripple during switching events Long control cables that pick up induced transients and create “virtual voltage” If the supervision

TonyZhang
Jan 86 min read


Is Your Anti-Pumping Circuit Truly Reliable?
Anti-Pumping: A “Must-Have” That Still Goes Wrong in Practice In high-voltage circuit breaker control circuits, anti-pumping (anti-reclose on an active command) is not optional. It is written into relay protection and anti-misoperation guidelines as a hard requirement : Before a breaker has completed one open–close–open sequence, the close coil must not receive another effective close command. Yet in real projects, two recurring issues still appear: Misuse of the breaker o

TonyZhang
Jan 55 min read
bottom of page
