Get Free Quote

When accidents occur in a substation,   the control power—not the primary circuit—often decides whether the system “can still see, can still act.”   If a single link in the control-power chain fails, protection IEDs, merging units, gateways, clocks, and communication devices may all go dark. That is why   dual-source control power with reliable automatic switching   is not an optional enhancement—it is   a requirement   for modern protection and station-control systems. Learn

High-voltage primary equipment keeps getting more diverse — split-phase breakers, multi-format energy-storage motors, inconsistent limit-switch schemes, interlocks spread across relays, and control cabinets filled with custom wiring. Yet utilities increasingly demand the opposite:   standardized, modular, repeatable control logic   that is easy to maintain, quick to replace, and consistent across brands. The   ODES PSME100 platform   delivers exactly that — a family of plug-a

High-voltage primary equipment has never been more diverse. Different breaker mechanisms, isolator drives, closing schemes, brand-specific limit switches, and AC/DC motor combinations make secondary design a moving target. Yet OEMs and utilities increasingly want the opposite:   a single control platform   that can cover most use cases with consistency, clarity, and repeatable engineering logic. That is the role of the   ODES PSME Series   — a unified family of DIN-rail contr

A unified motor-control platform that replaces “two contactors + motor protector” with clean, deterministic, and visualized control logic In many AIS (air-insulated switchgear) disconnector applications, control wiring is still built around two contactors, a motor protector, and a handful of relays and timers. It works — but it creates   wiring sprawl, fragile interlocking chains, inconsistent protection behavior, and difficult commissioning . The   PCM972 Integrated Motor Co

One integrated control module that replaces fragile “contactor + timer” circuits with deterministic protection and programmable logic A controller designed to eliminate cross-wiring, unify protection logic, and standardize GIS motor circuitry In many GIS isolator mechanisms, wiring complexity has become a technical debt: scattered relays, parallel signal bundles, multi-row terminal blocks, and heavy door wiring add effort, delay commissioning, and introduce long-term maintena

Modern utilities, especially in fast-pace operational environments, are moving toward  standardized, modular, and quickly replaceable  control architectures. Visit  www.odes-electric.com  to explore how ODES is supporting this transition with integrated HV motor-control solutions. In many high-voltage switchgear projects, energy-storage motor circuits are still stitched together with   timers, thermal relays, and contactors . They function, but they don’t scale. Any modificat

In most primary high-voltage switchgear,   energy storage motor circuits   are still pieced together with   timers, contactors, and thermal relays . These discrete setups “work,” but they are hard to modify, lack full protection visibility, and depend heavily on individual experience. The   ODES PSME309 Energy Storage Controller   changes that — transforming “handcrafted wiring logic” into   data-driven, parameter-based control . It integrates protection, configuration, and m

In most substations, temperature data for transformers still hides behind the control room screens. Oil, core, and winding temperatures — the “three thermometers” that reveal a transformer’s true condition — are often invisible at the equipment itself. Operators walk back and forth between panels and SCADA terminals just to confirm if things are running hot or cold. In regions like   Inner Mongolia, Gansu, and Xinjiang , where on-site staffing is essential, maintenance teams

In many primary-equipment projects,   energy-storage motor control circuits   are still built from discrete devices — a relay here, a contactor there, maybe a timer or a thermal overload. They work… until the logic changes, the power system evolves, or the environment pushes the limits of reliability. At that point, every adjustment feels like dismantling a house. The   ODES integrated energy-storage control platform   replaces this fragmented approach with a   unified, param

Motor control in medium-voltage   ring main units (RMUs)   is often underestimated. In reality, it’s not just about “making the motor turn.” For engineers, what matters is   stable positioning, safe interlocking, quick diagnostics , and the ability to perform reliably under high EMI, long-cable, or harsh environmental conditions. This is the engineering philosophy behind the   ODES PCM965 Series , a unified three-branch platform developed to cover   C-cabinet (load switch), F

In factory tests, everything runs smoothly. But on-site, things change — actuator resistance shifts, travel time lengthens, and stall thresholds no longer fit. Before long, engineers are unpacking laptops, installing drivers, and racing against daylight to finish re-tuning. Even worse, after several years of service,   spring fatigue, linkage wear, and backlash   make original parameters obsolete. Reconnecting communication cables and finding the right software version just t

Modern gas-insulated switchgear (GIS) relies on more than just motor actuation — it demands   stability, precision, and diagnostic intelligence   under harsh field conditions. Engineers face daily challenges such as unreliable positioning, misoperation, wiring complexity, and poor fault visibility. The   PCM Three-Position Programmable Motor Controller   from ODES is purpose-built to solve these issues through an   integrated, standardized, and EMC-hardened design . Learn mor

In today’s global power infrastructure market,   fault alarm systems   must not only react quickly but also present information with absolute clarity. Yet requirements for   alarm color indication   vary widely between countries: 🇹🇭   Thailand:   two-color indication standard   🇯🇴   Jordan:   three-color requirement   🇸🇦   Saudi Arabia:   six-color display for multiple alarm levels Many suppliers struggle to balance these regional differences within one design. ODES sol

Complex wiring doesn’t have to be the price of functionality. Discover how ODES is making GIS alarm systems lighter and smarter at   www.odes-electric.com The Problem: Cable Clutter in Modern GIS Panels In many GIS high-voltage switchgear projects,   door-control wiring —the bundles of signal cables running from the cabinet body to the front door—remains a persistent challenge. It’s common to see   30 or more wires , each several meters long, running through the door frame li

In secondary systems such as   protection and control ,   station communication , and   industrial automation , DC switch-mode power supplies are standard. Yet engineers often encounter an odd problem: the   load power is below the supply’s rating , but the unit still trips into overcurrent or overload protection at startup. The issue isn’t always poor quality—it’s usually poor   matching . Subtle transient conditions can create “invisible overloads.” This article explains th

Environmental control inside switchgear and automation panels depends on precise temperature-humidity regulation. Learn more about ODES’s   TH-E Series   controllers and complete environmental solutions at   www.odes-electric.com Why Two Wiring Methods Exist In practical applications, temperature-humidity controllers must not only switch heaters and fans locally but also satisfy requirements for   electrical safety, isolation, and EMC compliance . To meet these demands, the  

Maintaining a stable electrical environment is critical for modern switchgear and control cabinets. Learn more about ODES’s intelligent environmental control solutions at   www.odes-electric.com In switchgear, control cabinets, and electrical enclosures,   temperature–humidity controllers   are standard for maintaining a balanced environment. However, in   large or multi-chamber cabinets , thermal and moisture conditions are rarely uniform. Typical cases include: Tall or mult

The Role of Temperature Transmitters in Protection and Monitoring In modern protection and control systems,   accurate temperature measurement   is essential to assess transformer health and prevent thermal faults. Parameters such as   core temperature ,   winding temperature , and   oil temperature   form the foundation of transformer “tri-temperature” monitoring. The   STT Series temperature transmitters   from ODES are engineered for this purpose. Designed to meet IEEE and

The Challenge of DC Signal Diversity Direct-current measurement and control are essential to every power and industrial automation system, yet DC signals rarely come in a single form. In substations,   110/220 VDC control power   must be monitored accurately to ensure dependable tripping and closing operations. In industrial environments,   PLCs and DCSs   typically accept only standardized analog inputs such as   4–20 mA   or   0–5 V , while field devices often output unscal

In some overseas project specifications,   directly powering the protection device from the cabinet DC supply   during testing is not...